Chain - 420 x 100 Links - Tao Tao DB14, ATD125C Dimensions (+/- 1/16 inch): 4

Dimensions (+/- 1/16 inch): 4

Link for 18 teeth clutch:

Fuel drain comes out at 90 degree angle

Do you need your CDI fast

This handlebar brake master cylinder is the replacement part for many Chinese  atvs

Chain - 420 x 100 Links - Tao Tao DB14, ATD125C Dimensions (+/- 1/16 inch): 4Standard Drive Chain 420 This drive chain measurements are: 100 Links Roller width: 6. 25mm (0. 25 in) Chain Pitch (distance from pin to pin): 12. 70mm (0. 50 in) Roller diameter: 7. 77mm (0. 306 in) Includes master link Most ATVs use 100 link or less. IMPORTANT NOTE: Measure your old chain to make sure correct chain is ordered. ALL atvs use a standard numbered chain #420 chain used on ATVs usually with a 7. 0 inch rear wheel or smaller #428 chain