Victron Energy Argofet 100-2 Two Batteries 100A – ARG100201020R BlueSolar MPPT temperature and current sensing via

temperature and current sensing via Bluetooth

Similarly a current of 50 A through a cable of 10 mm2 cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0

Voltage 25

and higher efficiency

A maximum grid or generator current can be set

Victron Energy Argofet 100-2 Two Batteries 100A – ARG100201020R BlueSolar MPPT temperature and current sensing viaIn contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section. Example: When a current of 100 A flows through a cable of 50 mm2 cross