Support for PA/PET Size:0.5kg Print Spool Part 1&2 from

Print Spool Part 1&2 from the build-in files

5 kJ/m² Toughness (Impact Strength - XY

Mechanical Properties Tensile Strength N / A Breaking Elongation Rate N / A Bending Modulus N / A Bending Strength N / A Impact Strength N / A

it is recommeded further drying before use and after storage

Tough with High Impact Resistance

Support for PA/PET Size:0.5kg Print Spool Part 1&2 fromRFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 80 C12h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 280 300 C Bed Temperature (with Glue) 80 110 C Printing Speed < 100 mm s Physical Properties Density