Hop Spider then run your wort through

then run your wort through the chiller via a pump (BrewZilla pump or external pump)

56ft Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate)

Recommended Hosing EVABarrier 4mm(5/32) x 8mm(5/16) -12m Roll EVABarrier 5mm(13/64) x 8mm(5/16) - 12m Roll Please note: This is ideally to be mounted near your water inlet away from direct sunlight

High Quality & Safety : The heating pad has a dopted high quality waterproof PVC and thermostat

This Alcoengine Design on the other hand just requires a minimum water flow rate and that's it

Hop Spider then run your wort throughPerfect for containing hops while brewing beer and prevents hops getting into your chiller or fermenter! The spider sits over the edge of your kettle, keggle or is ideally suited to use with your Robobrew. During the boil hops can be poured directly into the spider. The spider is suitable for up to 300grams of hops. The basket is 35cm high with the opening at the top being15cm diameter and tapers down to a 10cm diameter at the bottom. Its completely