Takaab 4PAD - Quad Passive Pad / Preset Attenuator / Output Module Logic Inverter Both of our clock dividers

Both of our clock dividers together at 10% off

With the switches pushed in (AUTO) the lag effect will be normally off and will be switched on whenever a gate signal is present at one or both of the adjacent jack inputs

it can also drive to clipping levels on the output

and a RESET input to keep it in sync with another external source

NOISE is an analog noise source in a very usable range which is near-enough white noise with some roll-off at the lower and top end of the audible range

Takaab 4PAD - Quad Passive Pad / Preset Attenuator / Output Module Logic Inverter Both of our clock dividersA quad passive fixed attenuator with three level drop presets per channel, configurable via jumpers on the rear of the module. Useful for dropping hot eurorack signals to line level for use with non eurorack gear, or as a simple output module. Jumper Settings Jump middle pin to left pin = 9. 79dB (38% drop) Jump middle pin to right pin = 18. 29dB (88% drop) Omit jumper = 6. 02db (50% drop)