180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (42.0 mm OD, 177.8 mm CLR) Manual 3-Roll (Large Radius) Bender Our dimple dies are backed

Our dimple dies are backed by a LIFETIME WARRANTY

This roll set will bend the following sizes of material: 1/2" x 1/2" Square

| Includes: Degree Ring

Outside Diameter of the Tubing (OD): 42

If your parts are simple 2D parts (parts that lay flat when completed) then EZ will most likely do the trick

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (42.0 mm OD, 177.8 mm CLR) Manual 3-Roll (Large Radius) Bender Our dimple dies are backedSpecs Outside Diameter of the Tubing (OD): 42. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 083" (2. 1 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: 180, after springback Maximum Ovality: <10%,