Silicone T-Hose, 38mm (1.50") ID w/25mm (1") ID Branch SHL51-BLUE On top of all that

On top of all that

HJ35 and HJ28) and Lined Hose Clamps (Part No

The 3-ply reinforcement results in a 4mm wall thickness (36mm / 1 3/8" and 30mm / 1 3/16" OD) and a working pressure rating over 50 psi (250 psi burst pressure)

HJ54 and HJ51) and Lined Hose Clamps (Part No

The 3-ply reinforcement results in a 4mm wall thickness (43mm / 1 11/16" and 38mm / 1 1/2" OD) and a working pressure rating over 27 psi (135 psi burst pressure)

Silicone T-Hose, 38mm (1.50") ID w/25mm (1") ID Branch SHL51-BLUE On top of all thatOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is