Silicone Hose, 1 1/2 x 7/8 inch ID Straight Reducer Inch_4 Use them to connect any

Use them to connect any two 54mm ID hoses: an elbow to a straight section

This is critical to prevent the hose from coming off under pressure

HJ63 and HJ57) and Lined Hose Clamps (Part No

5mm wall thickness (100mm / 3 15/16" and 87mm / 3 7/16" OD) and a working pressure rating over 12 psi (64 psi burst pressure)

Use with our Aluminum Splicing Nipples (HJ38 and HJ35) and Lined Hose Clamps (Part No

Silicone Hose, 1 1/2 x 7/8 inch ID Straight Reducer Inch_4 Use them to connect anyOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These straight reducer hoses are approximately 5 inches long