You can access our easy installation guide prepared for the physical setup of the Clogger Temperature and Humidity Sensor from here. You can easily complete the physical installation of your Clogger device either by watching the installation video or by following the steps in order.
When you receive your product, it should appear as shown on the side. Open the box of your Clogger device in the presence of the delivery personnel and sign the delivery report only after ensuring that the product is intact. If your product is damaged during shipping, request a damage report to be issued.
Inside your Clogger box, you will find the temperature and humidity monitoring device, temperature and humidity sensors, mounting equipment, and a power adapter as shown below.
Press the small button on the end of your power adapter and insert it into the port located at the bottom of your Clogger device.
Attach your sensor with the blue tip using the self-adhesive cable holder included in the box, as shown in the image.
Peel off the backing of the self-adhesive tape and secure the sensor with the blue tip to the middle area of the second right shelf of the refrigerator. Plug the adapter into the socket to complete the physical installation.
You have completed the physical installation of your Clogger device. You can now begin configuring the Wi-Fi settings. In the next step, you can finalize the setup by entering your contact information, email, and SMS settings via sicaklikizle.com.
