You can access our easy installation guide prepared for the Wi-Fi setup of your Clogger Temperature and Humidity Sensor from here. You can easily configure the Wi-Fi settings of your Clogger device either by watching the setup video or by following the steps in order.
Verify the adapter connection of your Clogger Temperature and Humidity Monitoring device. Make sure the adapter is properly connected to your device.
For the Wi-Fi setup of your Clogger Temperature and Humidity Sensor, the Wi-Fi and Network icons on the top right corner of the device screen should blink intermittently. If you do not see the icons, please check the adapter connection of your device.
Press and hold the blue button on the Clogger device for 7 seconds. After 7 seconds, release the button and you will see the text “IP” appear on the screen. If the IP text does not appear, please repeat the process.
To set up Wi-Fi for your Clogger Temperature and Humidity Sensor, go to the Wi-Fi settings on your computer or mobile phone. From the list of available networks, select the one that starts with Clogger-AGE@ and click on the Connect button. When prompted, enter the password Age-1234 to complete the connection.
In your web browser’s address bar, type http://10.10.10.1/setup and press Enter. On the page that appears, enter your modem’s network name in the field labeled SSID, and enter your wireless (Wi-Fi) password in the Password field. Then click the SUBMIT button to save the settings. After saving, unplug and replug the adapter of your Clogger device. The Wi-Fi and Network icons on the top right corner of the device screen will now appear steadily. Your device is now ready to use.
If your internet network name (SSID) or password contains Turkish characters such as Ş, ş, Ç, ç, Ö, ö, Ü, ü, İ, I, or spaces, please change them to avoid connection issues.
If the icons do not appear steadily on the screen, it means the information you entered is incorrect. You will need to start over from step 1 and follow the instructions in the correct order.
